Semax + Selank dosage: units for each part
Semax and Selank in one vial. Both are more often used as nose drops. The numbers here are for the injected route. Pick your vial, the water you add and the part you want to dose by. You see the syringe units and what one shot gives of every part, next to each part's own common range.
Also called Semax/Selank
Draw 10 units (0.10 mL) to get 500 mcg of Semax. That one shot also holds:
- Semax500 mcgin its common range (300 mcg to 800 mcg, usually once a day)
- Selank500 mcgabove its common range (250 mcg to 400 mcg, usually once a day)
Units to amounts, for this vial and water
Units on a U-100 insulin syringe (100 units = 1 mL). Green is inside that part's common range, amber is below it, red is above it.
| Units | mL | Semaxcommon 300 mcg to 800 mcg | Selankcommon 250 mcg to 400 mcg |
|---|---|---|---|
| 2 | 0.02 | 100 mcg · low | 100 mcg · low |
| 4 | 0.04 | 200 mcg · low | 200 mcg · low |
| 5 | 0.05 | 250 mcg · low | 250 mcg |
| 6 | 0.06 | 300 mcg | 300 mcg |
| 8 | 0.08 | 400 mcg | 400 mcg |
| 10 | 0.10 | 500 mcg | 500 mcg · high |
| 12 | 0.12 | 600 mcg | 600 mcg · high |
| 15 | 0.15 | 750 mcg | 750 mcg · high |
| 20 | 0.20 | 1 mg · high | 1 mg · high |
| 25 | 0.25 | 1.25 mg · high | 1.25 mg · high |
| 30 | 0.30 | 1.5 mg · high | 1.5 mg · high |
| 40 | 0.40 | 2 mg · high | 2 mg · high |
| 50 | 0.50 | 2.5 mg · high | 2.5 mg · high |
How a blend works
- The ratio is fixed. Every unit holds the same share of each part. More of one means more of all.
- Dose by one part. Pick the part that matters most to you. The others land wherever the ratio puts them, a little high or a little low. The colors show where.
- The parts are usually taken on different schedules. Semax: usually once a day; Selank: usually once a day. One blend shot puts them on the same schedule.
- Check your label. If your vial lists different amounts, pick the recipe that matches, or use the Mix calculator in the corner.
- Little blend research. Studies tested each part alone, not the mix. Each part's page has its studies.
Each part on its own
Common questions
How many units of Semax + Selank do I draw?
It depends on the vial and the water. With the 20 mg (10 + 10) vial and 2 mL of water, 10 units holds 500 mcg of Semax. Pick your own vial and water on this page and the numbers change to match.
Can I take more of one part of Semax + Selank without the others?
No. The parts are mixed in a fixed ratio in one vial, so every unit holds the same share of Semax and Selank. Drawing more raises all of them. To get more of one part alone, it would have to come from its own vial.
Why is one part of Semax + Selank high when another is in range?
Each part has its own common range, and the vial ratio does not match all of them at once. Dose by the part that matters most to you, then check the colors to see where the others land.
What is in Semax + Selank?
Semax and Selank in one vial. Both are more often used as nose drops. The numbers here are for the injected route. Recipe shown: 20 mg (10 + 10).
Is this a recommendation for how much to use?
No. This page does the vial math and shows each part's range as reported by labels, clinics and users. It is not medical advice and not a recommendation for anyone. Talk to a licensed clinician before using any of it.
This page does vial math and shows what labels, clinics and users report for each part. It is not medical advice and not a recommendation for anyone. Many of these compounds are not approved for human use. Check with a licensed clinician before using anything.